Philips AZ1116/10 - Recording from the Radio

CASSETTE RECORDER
1. Set the source selector to RADIO.
2. Tune to the desired radio station using the TUNING knob.
3. Press STOP•OPEN 9/to open the cassette holder.
4. Insert a blank cassette.
5. Press RECORD 0 to start recording.
6. For brief interruptions, press PAUSE ;. To resume recording, press
PAUSE ; again.
7. To stop, press STOP•OPEN 9/.
1. Set the source selector to CD.
2. Insert a CD and if desired, program track numbers.
3. Press STOP•OPEN 9/to open the cassette holder.
4. Insert a blank cassette.
5. Press RECORD 0 to start recording.
– Playing of the CD program starts automatically from the beginning
of the program. It is not necessary to start the CD player sepa-
rately.
6. For brief interruptions, press PAUSE ;. To resume recording, press
PAUSE ; again.
7. To stop recording press STOP•OPEN 9/.
To select and record a particular passage within a track
1. Press ∞ SEARCH or SEARCH § to select a passage.
2. Put the CD player in PAUSE ; position at the selected passage.
– Recording will start from this exact point when you press
RECORD 0.
CD SYNCHRO START RECORDING
RECORDING FROM THE RADIO
10
AZ 1110/01 page 10
English
DYNAMIC
•CD
•RADIO
•TAPE
POWER OFF
DBB
BOOST
POWER ON
P
LAY•PAUSE
PAUSE
SEARCH
PLAY
RECORD
STOP • OPEN
PAUSE
SEARCH
PLAY
RECORD
STOP • OPEN
A
Y•PA
USE
PAUSE
SEARCH
PLAY
RECORD
STOP • OPEN
PAUSE
SEARCH
PLAY
RECORD
STOP • OPEN
SHUFFLE
SEARCH
MODE
SEARCH
PLAY
RECORD
EN
SEARCH
PLAY
RECORD
N
AZ 1110/12 10/4/01 18:03 Page 10