1 Plug the USB device into the socket of the unit.
2 Push the source selector to CD/USB/AUX .
3 Press USB to select the USB source.
4 Press ALBUM +/- to select a folder.
5 Press / to select an audio fi le.
6 Press to start play.
To pause/resume play, press • .
To stop play, press • .
To search within an audio fi le, press and hold •
/ , then release to
resume normal play.
5 Play options
Repeat and random play
1 Press MODE repeatedly to select:
[REP] (repeat): the current track is played repeatedly.•
[REP ALL] (repeat all): all tracks are played repeatedly.•
[SHUF] (shuffl e): all tracks are played randomly.•
2 To return to normal play, press MODE repeatedly until play mode is no longer
displayed.
Tip
Shuffl e play cannot be selected when you play programmed tracks. •
Program tracks
You can program a maximum of 20 tracks.
1 At CD/USB mode, in the stop position, press PROG to activate the program
mode.
[PROG] (program) is displayed. »
2 For MP3/WMA tracks, press ALBUM +/- to select an album.
3 Press / to select a track number, then press PROG to confi rm.
4 Repeat steps 2 to 3 to select and store all tracks to program.
5 Press to play the programmed tracks.
During play, [PROG] (program) is displayed. »
To erase the program, in the stop position, press •
.
To Next Page
Loading...
