Philips AZ318B - Getting Started; Connecting Power and Battery Usage

5 EN
4 Get started
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Connect power
YoucanuseeitherACpowerorbatteryas
power supply of this unit.
AC power
Warning
•
Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the back or the underside of the unit.
• Risk of electric shock! When you disconnect the AC
power, always pull the plug or adaptor from the socket.
Never pull the cord.
1 Adjust the voltage selector at the bottom
of the unit to correspond to the local
power voltage.
2 Connect the AC power cord to:
• the AC ~ socket on the unit.
• the wall outlet.
Battery power
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshineorre.Neverdiscardbatteriesinre.
• Batteries contain chemical substances, so they should
be disposed of properly.
Note
•
Batteries are not supplied with the accessories.
1 Open the battery compartment.
2 Insert 6 batteries (type: R14/ UM2/ C
CELL)withcorrectpolarity(+/-)as
indicated.
3 Close the battery compartment.
6X1.5V R14/UM2/C CELL