To Next PageTo Next Page
Need help?Do you have a question about the Philips AZ380/55/96/93/94 and is the answer not in the manual?
General| Brand | Philips |
|---|---|
| Category | CD Player |
| Radio Tuner | Yes |
| Display Type | LCD |
| Playable Disk Types | CD, CD-R, CD-RW |
| Audio Playback Modes | Repeat |
| Audio Output | Headphone Jack (3.5mm) |
| Power Source | Battery |
CDMP3 with USD Boombox Output Power 2x1W.
5 YEARS (ACC. TO UAN-D1611).
Details on TUNER, AMPLIFIER, SPEAKER BOXES, RECORDER, CLOCK, CD, DCC, TELEPHONE, REC. PLAYER.
EN 60065 (IEC 65) CE.
EN55013, EN55020, (Version 55 approbation CB only).
-10 °C till +50 °C (Functional); pre-conditioning 2 hr.
AC operation voltage selection and DC (int. or ext.) operation / Backup Buffer.
Power off mode, standby, and maximum power consumption.
Details on product versions, AC voltage/frequency, safety tolerance, tuner, and approbation.
Notes on operation and thermal stability test for voltage settings.
Specifies wave ranges for FM and AM, tuning steps, and tolerances.
Details on MW Ferrite and FM wire aerial specifications.
Describes pointer stroke and knob indication features.
Electrical data for AM reception, including rated output power and suppression.
Electrical data for FM reception, including sensitivity, selectivity, and frequency response.
Details on headphone type, loudspeaker filters, power stage protection, and public address.
Information on output power or VU-meter, frequency response, and low power battery indicator.
Data on balance control, mechanical noise, noise overall, channel difference, and hum.
Specifications for mains and battery operation output power, music power, and short/long term output.
Crossover frequencies, output power, and frequency response for the loudspeaker.
Notes for measured parameters in Tuner mode, CD, or Tape mode.
Details on LCD display, slide switches, tact switches, and playability test conditions.
Specifies shock resistance values for Z axis and X or Y axis.
Acoustical noise levels for Play/Pause and Jump modes.
Notes on acoustic feedback, referencing test discs and THD.
Measured audio parameters including output level, SNR, crosstalk, frequency response, and THD.
Specifies amplification reserve for CD and reference levels.
Lists various test discs for CD-RW and MP3 compatibility.
Details on CD-RW playability tests like fingerprint, black dot, and reflection.
Checks MP3 data format compatibility, including file format, sample rate, bitrate, and multissession.
Details main and key board service policies across different versions.
Lists features like RDS, VOLTAGE SELECTOR, and ECO STANDBY - DARK for different versions.
Explains service policy codes C (Component Lever Repair) and M (Module Lever Repair).
Precautions for ICs and semiconductors susceptible to electrostatic discharges (ESD).
Requirement to restore the set to original condition using specified parts.
Warning about invisible laser radiation when the unit is open. Avoid direct exposure.
Service instructions for qualified personnel, including leakage current test.
