EasyManua.ls Logo

Philips AZ5155/01 - Remote Control and Power Supply Details; Remote Control Button Functions; Power Supply Information and Warnings

Philips AZ5155/01
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3 - 2
IMPORTANT!
For best CD/MP3-CD/VCD playback, please plug in your set to an AC power supply where
convenient.
If operated in DC mode, see below approximate playtime. (Playtime is also varied from
different brand batteries) :
The CD part of this system also serves as a Video CD player if you connect it to your TV
set.
Before viewing the Video CD, ensure that the set is switched to corresponding PAL or
NTSC system of your TV set (exception Multi-system TV).
Whenever convenient, use the mains supply if you want to conserve battery life. The battery supply
will be switched off when the set is connected to the mains.
Make sure you remove the plug from the
set and wall outlet before inserting batteries.
Batteries
1. Open the battery compartment and insert six batteries, type
R20, UM1 or D-cells, (preferably alkaline) with the correct
polarity as indicated by the "
+" and "-" symbols inside the
compartment.
Remote control
Open the battery compartment and insert two batteries,
type AAA, R03 or UM4 (preferably alkaline).
2. Replace the compartment door, making sure the batteries are
firmly and correctly in place.
3. Remove the batteries if they are exhausted or if they will not be
used for a long period.
– The incorrect use of batteries can cause electrolyte leakage
and will corrode the compartment or cause the batteries to
burst. Therefore:
Do not mix battery types, e.g. alkaline with zinc carbonate.
When inserting new batteries, replace all at the same time.
Remove the batteries if the set is not to be used for a long time.
Notes :
–The battery supply is switched off when the set is connected to the mains.
TV screen is disabled during CD / MP3-CD playing if your AZ5155 is battery
powered.
Batteries contain chemical substances, so they should be disposed of properly
BATTERIES (NOT SUPPLIED)
POWER SUPPLY
Battery type Playtime
Alkaline approximate 9 hrs
Zinc Cartonate approximate 45 minutes
CONNECTIONS AND CONTROLS
REMOTE CONTROL
8 PROG
for CD/VCD/MP3-CD . . . to programme disc
tracks.
9 REPEAT
for MP3-CD . . . . . . . . to repeat a track, or
whole disc.
for CD/VCD . . . . . . . . to repeat a disc track or
the whole disc.
0 A - B - to playback a certain scene or passage
repeatedly (for CD/VCD operation only).
! ZOOM
for VCD only . . . . . . . to zoom in or zoom out
picture.
@ SHUFFLE - When in CD/VCD mode, press to
start or stop shuffle play mode.
# MIX/SEL - to select disc format (CD / MP3-CD)
in a mixed mode disc.
$ NTSC/PAL - to select the video output for
NTSC or PAL system.
% R/L/ST - to select channel left / channel right /
stereo sound, or to select a language in a
bilingual VCD.
^ DIGITS 0 - 9
for CD/VCD/MP3-CD - to select a
track number.
(numbers consisting more than 2 figures must
be keyed in within 2 seconds)
& PLAY/PAUSE 2;
- to start or interrupt playback.
* SEARCH 5 or 6 (for CD/VCD/MP3-CD)
- to search back or forward.
( ALBUM ¡ ™
for MP3-CD only . . . . to select previous / next
album
) TRACK §
§
for MP3-CD only . . . . to select previous/next
title.
for CD/VCD . . . . . . . . to search backward/
forward track.
¡ STOP 9
- to stop playback or to clear a programme.
KEY+ / KEY- - to change the VCD key tone to
suit to your vocal range.
£ ECHO + / ECHO - - to adjust the VCD echo
level for karaoke after you inserted a
microphone.
REW FWD
MX / SEL
£
4

Related product manuals