CD/VCD/MP3-CD
Programming tracks of disc is possible when playback is stopped. Up to 20 tracks can be stored in
the memory in any order.
1. In stop mode, press PROG on the remote control to enter programme setting.
™ PROG will flash on the display.
2. Press digits 0 - 9 on the remote control or
/ §
§
§
§
to select the desired track.
3. Press PROG to store the select track. The number “XXX” represents the track no.
•
Repeat steps 1 to 3 to store other tracks.
4. Press 9 to end programme setting.
™ PROG will remain on the display.
•
Press PROG (on remote control) in stop mode to review the programme sequence.
5. Press
2;
to play the programmed tracks.
•
If you press REPEAT during programme playback, the current track or all programmed tracks will
be played repeatedly.
™ REPEAT/REPEAT ALL icon and PROG will appear on the display.
6. Press 9 in stop mode to clear the programme.
™ PROG will disappear from the display.
Notes : -The programming is automatically cleared as soon as the CD compartment is opened.
- The function of programme setting is disabled in PLAY/PAUSE mode.
- Programme cannot be used for VCDs when PBC is switched on. Switch off PBC before
storing tracks from such a VCD.
For MP3-CD only
1. In stop mode, press
PROG
on the remote control to enter programme setting.
™
PROG
will start flashing and " P01" will be displayed.
™ On TV screen, "PROG" program list (5 lines per page) will be displayed.
2. Press digits 0 - 9 on the remote control or
¡ / ™
to select the desired album.
3. Press
PROG
to store the select album. The number “AXX” represents the album no.
4. Press
/ §
repeatedly (or digits 0 - 9 on the remote control) to select the desired TRACK for
programming.
5. Press
PROG
to store the select track.
™ PROG will remain on the display.
•
Repeat steps 1 to 5 to store other desired album and track.
6. Press 9 to end programme setting.
•
Press
PROG
in stop mode can review the programme sequence.
7. Press 2 to start programme playback. You can press
/ §
to select the programmed track to
play.
8. Press 9 once stop programme playback or twice to clear the programme.
PROGRAMMING TRACKS
CD/VCD/MP3-CD
™ On TV screen, the total ALBUM and TRACK number will display, also with the album list (max.
10 lines per page). The current selected music is highlighted.
Notes : - To ensure good system performance, wait until the disc completely reads before
proceeding.
- For MP3-CD, the disc reading time may exceed 1 minute due to the large number of
songs compiled into one disc.
1. Press
2;
to start playback.
™ The track number of the current track and
2
appear on the
display.
•
To interrupt playback, press
2;
.
™
2
will disappear and the current track number will start flashing.
•
To resume playback, press
2;
again.
2. To stop playback, press 9.
To select a desired track
•
Press
or §
§
§
§
§§
§
§
on the set repeatedly (or use digits 0 - 9 buttons on the remote control) until the
desired track appears on the display.
•
If playback is stopped, press
2;
to start playback.
To search for a particular passage during playback
•
Press and hold
or §
on the set for 1 second (or on the remote
control,press
5 or 6
)
™ During searching, the volume will be muted.
For MP3-CD only
To select a desired album
•
On the remote control, press
¡ or ™
until the desired album number appear on the display.
™ "AXX" will be displayed.
™ On TV screen, the arrow will move forward/backward in the ALBUM menu.
To select a desired track
•
Press
or §
on the set repeatedly (or on the remote control, press
or §
) to select a desired
track from the current album.
™ "XXX" will be displayed.
™ On TV screen, the arrow will move forward/backward in the TRACK menu.
•
Use the digital keys on the remote control to select the track under current album directly.
To select and playback another track during playback mode
1. Press
or §
repeatedly to select another track.
™ The new selected track will show on the display screen and TV screen and playback
continuously.
2. Press
2;
to start playback the new selected track.
For VCD only
• Either p
ress
5
or
6
on the remote control repeatedly to select fast search speed (x1, x2, x3 or x4)
or
press & hold
or §
on the set for 1 second and then release
or §
to select fast search speed
(x1). Repeat this step to select other speed (x2, x3, x4).
SELECTING A DESIRED TRACK/PASSAGE
PLAYING A NORMAL DISC
To Next Page
Loading...
