Philips B8 SkyQuake Fidelio - Product specifications; Wireless speaker link; Main Unit Specifications; Built-in speakers

19
7 Product
specifications
Note
•
Specications and design are subject to
change without notice.
Amplier
• Total output power:
400W RMS (+/- 0.5 dB, 10% THD)
• Frequency response:
20 Hz-20 kHz / ±3 dB
• Signal-to-noise ratio: > 65 dB
(CCIR) / (A-weighted)
• Input sensitivity:
• AUX: 1900 mV
• AUDIO IN: 900 mV
Audio
• S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
USB
• Compatibility: Hi-Speed USB (2.0)
• Class support: USB Mass Storage
Class (MSC)
• File system: FAT16, FAT32
• Supports MP3 le format
Bluetooth
• Bluetooth proles: A2DP, AVRCP
• Bluetooth version: 3.0
• Frequency band/Output power:
2400 - 2483.5 MHz / ≤ 20 dBm
• NFC frequency: 13.56 MHz
Wireless speaker link
• Frequency band: 5740-5840 MHz
• Output power: ≤ 14 dBm
Main unit
• Power supply:
• Model (Philips branded AC power
adapter): DYS902-190473W
• Input: 100-240 V~, 50/60 Hz 1.5 A
• Output: 19V
, 4.73A
• Standby without clock display:
≤ 0.5 W
• Standby with clock display: ≤ 1 W
• Dimensions (W x H x D):
1058 x 52 x 120 mm
• Weight: 3.65 kg
• Built-in speakers
• 6 x silk tweeter (1’’, 3 ohm)
• 2 x silk tweeter (0.8’’, 8 ohm)
• 4 x racetrack woofer speaker (3.5’’
x 1’’ , 16 ohm )
• Centre channel: 2 x racetrack full-
range speaker ( 3.5’’ x 1’’, 16 ohm)
• Front/surround channel: 4 x
racetrack woofer speaker ( 3.5’’ x
1’’, 8 ohm)
Subwoofer
• Power supply: 220-240 V~, 50-60 Hz
• Power consumption: 60 W
• Standby power consumption: ≤ 0.5 W
• Impedance: 3 ohm
• Speaker drivers: 1 x 8’’ subwoofer
• Dimensions (W x H x D):
240 x 510 x 302 mm
• Weight: 8.9 kg
Remote control batteries
• 2 x AAA-R03-1.5 V
EN