Philips BDL4830QL - Connecting External Equipment; Wire-connecting to Network

BDL4830QL
13
3.6. Wire-connecting to Network
If you connect this display to a home network, you can play photos, music and videos from your computer. See 3OD\PXOWLPHGLDÀOHVYLD/RFDO$UHD1HWZRUN
(Page 14) for more detail.
PC
[RJ-45]
[RJ-45]
ROUTER
INTERNET
To setup the network:
1. Switch on the router and switch on its DHCP setting.
2. Connect the router to this display with an Ethernet cable.
3. Press [
] HOME button on the remote control, then select
Setup
.
4. Select
Connect to network
, then press [ ] button.
5. Follow the on-screen instructions to install the network.
6. 
7. If you are prompted, agree to the “”.
NOTE: Connecting with a shielded CAT-5 Ethernet cable to comply with the EMC directive.