How to fix no picture on my Philips LCD TV?
If your Philips LCD TV displays no picture, check the following: ensure the power cord is properly plugged in, verify that the main power switch on the back of the display is turned on, and confirm that the selected input has a signal connection to the display. Also, make sure the display is not in standby mode.
Why can I hear sound but no picture on my Philips BDL6520QL?
If you can hear sound but there's no picture on your Philips LCD TV, the source signal cable might be improperly connected. Make sure that both video and sound inputs are correctly connected.
Why is the color abnormal on my Philips BDL6520QL?
If the color on your Philips LCD TV appears abnormal, ensure that the signal cable is firmly attached to the back of the display.
What to do if picture is distorted with abnormal patterns on Philips BDL6520QL?
If the picture on your Philips LCD TV is distorted with abnormal patterns, make sure the signal cable is firmly attached. Also, check the video signal source to ensure it is within the display's capabilities. Refer to the display's specification section to verify compatibility.
What to do if some picture elements do not light up on my Philips LCD TV?
This display is manufactured using an extremely high level of precision technology: however, sometimes some pixels of the display may not display. This is not a malfunction.
How to prevent after-images on Philips BDL6520QL LCD TV?
To prevent after-images on your Philips LCD TV, do not allow a still image to be displayed for an extended period of time, as this can cause a permanent after-image to remain on the display.
What to do if I can see picture but no sound on my Philips LCD TV?
If you can see the picture on your Philips LCD TV but cannot hear any sound, ensure that both video and sound input cables are correctly connected. Also, check that the volume isn't turned all the way down and that the mute function is off. If you're still not hearing sound, connect external speakers and adjust the volume.
How to reduce interference on Philips LCD TV?
If you see interference or hear audible noise on your Philips LCD TV, it might be caused by nearby electrical appliances or fluorescent lights. Try moving the display to another location to see if the interference is reduced.
How to adjust screen size on Philips LCD TV?
If the display image on your Philips LCD TV doesn’t fill up the full screen, use the Zoom mode or Custom zoom function in the Screen menu to fine-tune the display geometry and time frequency parameter.
General| Screen Size | 65 inches |
|---|---|
| Diagonal Size | 65 inches |
| Resolution | 1920 x 1080 |
| Display Technology | LCD |
| Backlight Type | LED |
| Brightness | 350 cd/m² |
| Contrast Ratio | 4000:1 |
| Viewing Angle | 178° |
| Response Time | 8 ms |
| PC Interface | VGA |
| Commercial Use | Yes |
| Weight | 52.91 lbs |
| Refresh Rate | 60 Hz |
| Smart TV | No |
| HDR | No |
| USB Ports | 2 |
| Built-in Wi-Fi | No |
| Bluetooth | No |
| Audio Output | 2 x 10W |
| Video Interface | HDMI |
Essential safety precautions for connecting and operating the display, including environmental and handling instructions.
Steps for maintaining the display's condition, including cleaning and protecting from damage.
Steps for safely opening the package, verifying contents, and identifying included accessories.
Instructions for mounting the display on a wall using standard kits and VESA specifications.
Identification and description of various analog and digital input/output ports on the display.
Overview of the remote control buttons and their primary functions for display operation.
How to connect devices using COMPONENT (YPbPr) and COMPOSITE (Y/CVBS) video inputs.
Guide for connecting PCs via HDMI, VGA, and DVI inputs for video transmission.
How to connect PCs using HDMI and DisplayPort for video input.
Guide for connecting external speakers to the display for audio output.
Instructions for connecting external audio devices like stereo amplifiers.
How to connect multiple displays in a chain for video walls or large display setups.
How to choose and display content from connected video sources.
How to use the display as a Digital Media Player (DMP) to access network media.
Setting up the display as a Digital Media Renderer (DMR) for PC control.
Instructions for playing multimedia files directly from a USB storage device.
How to access the On-Screen Display (OSD) menu using the remote or control panel.
Detailed guide to adjusting picture settings like brightness, contrast, sharpness, and enhancement.
Definition and explanation of pixels, sub-pixels, and how they form an image.
Describes different types of pixel defects, including bright and dark dots, and defines a defective "dot".
Specifies acceptable levels for pixel defects, including proximity and total counts, for warranty claims.
Solutions for problems like no picture, distorted images, or incomplete screen fill.
Troubleshooting steps for issues with sound, picture, or after-images.
Details on screen size, resolution, pixel pitch, brightness, contrast, and viewing angle.
Technical specifications for all input and output ports, including HDMI, DVI, VGA, and audio.
To Next Page