Philips BDL6520QL - Sound and Tiling Settings; Sound Settings Configuration; Tiling Function Setup

BDL6520QL
19
5.1.2. Sound
Sound style
Bass
Treble
Balance
Volume
Minimum volume
Maximum volume
Surround mode
Audio out (line out)
Advanced
Picture
Sound
Tiling
Network
General settings
Sound style
Accesspredenedsoundsettings.
Bass
Adjusttoincreaseordecreaselower-pitchedsounds.
Treble
Adjusttoincreaseordecreasehigher-pitchedsounds.
Balance
Adjusttoemphasizeleftorrightaudiooutputbalance.
Volume
Adjusttoincreaseordecreasethevolume.
Minimum volume
SettheMinimumvolume.
Maximum volume
SettheMaximumvolume.
Surround mode
Setsurroundeffectsforaudioperformance.
Audio out (line out)
Adjustaudiooutputvolume.
Advanced
Accessadvancedsettingstoenhanceyouraudioexperience.
• {Auto volume leveling}:Enablethereductionofsuddenvolume
changes.
• {Speaker settings}:Turnonorofftheinternalspeakers.
• {Clear sound}:Enhancesoundquality.
• {Audio out format}:Choosethetypeofaudiooutputthrough
thedigitalaudiooutputconnector.(HDMIonly)
• {Audio out delay}:Automaticallysynctheimageonthisdisplay
totheaudiofromaconnectedhometheatre.
• {Audio out offset}:Adjustthesettingforaudiooutputdelay.
Availableif{Audio out delay}isswitchedon.
Sound reset
Resettodefaultsetting.
5.1.3. Tiling
Enable
H monitors
V monitors
Position
Frame comp.
Switch on delay
Picture
Sound
Tiling
Network
General settings
Withthisfunctionyoucancreateasinglelarge-screenmatrix(video
wall)thatconsistsofupto100setsofthisdisplay(up to 10-sets on the
vertical and 10-sets on the horizontal sides).Thisfunctionrequiresone
ormoredaisy-chainconnections.
Enable
Chooseto{On}or{Off}theTilingfunction.If{On},thedisplaywill
applythesettingsin{H monitors},{V monitors},{Position},and
{Frame comp.}.
H monitors
Adjustdisplaysonthehorizontalside.
V monitors
Adjustdisplaysontheverticalside.
Position
Adjustthepositionofthisdisplayinthescreenmatrix.
Example: 2 x 2 screen matrix (4 displays)
Hmonitors=2displays
Vmonitors=2displays
1 2
3 4
H monitors
V monitors
Position