Philips BDM3201F - Operating the Display

5
2
.
S
etting up the Display
Connecting to your PC
1
1
2
2
4
3
3
AC/DC power input
DVI input
VGA input
Kensington anti-theft lock
Connect to PC
1. Connect the power cord to the back of
the Display firmly.
2. Turn off your computer and unplug its
power cable.
3. Connect the Display signal cable to the
video connector on the back of your
computer.
4. Plug the power cord of your computer and
your Display into a nearby outlet.
5. Turn on your computer and Display. If the
Display displays an image, installation is
complete.
2.2 Operating the Display
Front view product description
Switch Display’s power ON and
OFF
.
SmartImage. There are
six modes to be selected:
Office, Photo,Movie,
Game,Economy,Off.
Return to previous OSD level.
Change the signal input source.
Adjust the OSD menu.
Change display format
Adjust the OSD menu.
Access the OSD menu .
Confirm the OSD adjustment.