Philips BDP2100 - Sound Settings; Network Settings; Preference Settings

15EN
Note

If you change a setting, make sure that the TV supports
the new setting.
 For settings related to HDMI, the TV must be
connected through HDMI.
 For the composite connection (via the VIDEO
connector), select a video resolution of 480i/576i
or 480p/576p under [HDMI Video] to enable video
output.
Sound
1
Press .
2 Select [Setup] > [Audio] to access the
audio setup options.
 [Night Mode]: Select quiet or full
dynamic sound. Night mode decreases
the volume of loud sound and
increases the volume of soft sound
(such as speech).
 [HDMI Audio]: Set an HDMI audio
format when this player is connected
through HDMI.
 [Digital Audio]: Select an audio format
for the sound output when this
player is connected through a digital
connector (coaxial).
 [PCM Downsampling]: Set the
sampling rate for PCM audio output
when this player is connected through
a digital connector (coaxial).
Note

For settings related to HDMI, the TV must be
connected through HDMI.
 Night mode is only available for Dolby encoded DVD
and Blu-ray discs.
Network
(installation, status...)
1
Press .
2 Select [Setup] > [Network] to access the
network setup options.
 [Network installation]: Start a wired
or wireless installation to make the
network work.
 [View network settings]: Display the
current network status.
 [View wireless settings]: Display the
current Wi-Fi status.
 [Name your Product:]: Re-name this
SOD\HUIRULGHQWLÀFDWLRQLQDKRPH
network.
Preference
(languages, parental control...)
1
Press .
2 Select [Setup] > [Preference] to access
the preference setup options.
 [Menu language]: Select an onscreen
display menu language.
 [Audio]: Select an audio language for
video.
 [Subtitle]: Select a subtitle language for
video.
 [Disc Menu]: Select a menu language
for a video disc.
 [Parental Control]: Restrict access to
discs that are encoded with ratings.
,QSXWWRDFFHVVWKHUHVWULFWLRQ
options. To play all discs irrespective of
WKHUDWLQJVHOHFWOHYHO
 [Screen Saver]: Enable or disable
screen saver mode. If enabled, the
screen enters idle mode after 10
minutes of inactivity
(for example, in pause or stop mode).
 [Auto Subtitle Shift]: Enable or disable
subtitle shift. If enabled, the subtitle