What to do if Philips BDP5650/98 Blu-ray Player buttons do not work?
If the buttons on the Philips Blu-ray Player do not work, disconnect the player from the power supply for a few minutes, and then reconnect it.
What to do if there is no picture on Philips Blu-ray Player?
Make sure that the TV is switched to the correct source input for this player.
What to do if there is no picture on HDMI connection on Philips Blu-ray Player?
If you're getting no picture on your Philips Blu-ray Player via HDMI, first, verify that the HDMI cable isn't faulty, and replace it if necessary. You can also try pressing the button on the remote control and then pressing “731” on the numeric buttons to restore the picture display. The picture should also recover automatically after 10 seconds. If the Blu-ray player is connected to an unauthorized display device with an HDMI cable, the audio and video signals may not be output.
How to fix no audio output from the TV with Philips BDP5650/98 Blu-ray Player?
If you're not getting any audio output from the TV with your Philips Blu-ray Player, ensure that the audio cables are correctly connected to the audio input of the TV. Also, make sure that the TV is switched to the correct source input for the Blu-ray player.
Why Smart TV does not work on Philips Blu-ray Player?
If the Smart TV function isn't working on your Philips Blu-ray Player, verify that the network is correctly connected and the network installation is complete. You may also need to check the router connection.
How to fix no audio from external audio device on Philips BDP5650/98?
If you're experiencing no audio output from the loudspeakers of the external audio device (home theater or amplifier) when using your Philips Blu-ray Player, check that the audio cables are connected to the audio input of the audio device. Additionally, switch the external audio device to the correct audio source input.
Why no sound on HDMI connection with Philips BDP5650/98?
If you're not hearing any sound on the HDMI connection with your Philips Blu-ray Player, it might be because the connected device is non-HDCP compliant or only DVI-compatible.
What to do if the buttons on Philips BDP5650/98 do not work?
If the buttons on your Philips Blu-ray Player do not work, disconnect the player from the power supply for a few minutes, and then reconnect it.
How to fix Philips BDP5650/98 buttons that do not work?
If the buttons on your Philips Blu-ray Player aren't working, disconnect the player from the power supply for a few minutes, and then reconnect it.
Why is there no picture on my Philips BDP5650/98 HDMI connection?
If you're not getting a picture via HDMI, first ensure the HDMI cable isn't faulty, and replace it if necessary. You can also try pressing the button on the remote control, then pressing “731” on the numeric buttons to recover the picture display, or wait 10 seconds for auto recovery. Additionally, the audio and video signals may not be output if the player is connected to an unauthorized display device.
General| Video Upscaling | Yes, up to 1080p |
|---|---|
| Connectivity | HDMI, USB, Ethernet |
| Wi-Fi | No |
| 3D Playback | Yes |
| Smart TV | Yes |
| Disc Types Supported | BD, DVD, CD |
| Video Output | HDMI, Composite Video |
| Audio Output | HDMI |
To Next Page