Chapter 4 Device Setup
37
There are several DC power indicators that will display on-screen to indicate which battery is in use
(if applicable), if the batteries are low, charging, or discharged, etc. The following table explains all
of the DC power indicators.
DC Power Indicator Description
Battery in Use Indicator A black box will appear around the battery that is in use. For in-
stance, if the external battery is currently in use, the ( ) symbol
appears on-screen.
Green Fully Charged Battery
Indicator
When a battery is charged to greater than 90% of its capacity, all of
the bars in the battery symbol will appear in green.
Partially Charged Battery
Indicator
When a battery symbol is partially charged, some of the bars in
the battery symbol will appear in green, while others will be clear.
For instance, if the external battery is 50% charged, the following
symbol displays on-screen:
Yellow Low Battery Indicator
(Medium Priority)
When the device detects that an in-use battery’s charge is low (has
approximately 20 minutes of charge left), the inside of the box sur-
rounding the battery symbol turns yellow. (In addition, a medium
priority alarm message will display indicating “Low Battery.” See
Chapter 3 for more information. The yellow indicator is for the last
available battery source.
Red Low Battery Indicator When the device detects that an in-use battery’s charge is nearly
depleted (has approximately 10 minutes of charge left), the inside
of the box surrounding the battery symbol turns red. In addition, a
high priority alarm message displays indicating “Low Battery.” See
Chapter 3 for more information. The red indicator is for the last
available battery source.
Yellow Battery Recharging
Symbol
Whenever AC power is applied to the device, the detachable bat-
tery will recharge as needed. If the detachable battery is being
recharged, the ( ) symbol displays.
To Next Page
Loading...