Chapter 5 Viewing and Changing Settings
53
Date Format
Select either mm/dd/yyyy or dd/mm/yyyy as the date format that will display on the device
screens.
Time Format
Select either an AM/PM time format (hh:mm AM) or 24 Hour time format (hh:mm) For example,
2:49 PM or 14:49.
Month
The month defaults to the current month. The adjustable range is from 1 (January) – 12 (December).
Day
The day defaults to the current day. The adjustable range is from 1 – 31. The maximum value is
based on the selected month.
Year
The year defaults to the current year. The adjustable range is from 2000 – 2099.
Hour
The hour defaults to the current hour. The adjustable range is from 12 AM – 12 PM or 0-23,
depending on the selected Time Format.
Minute
The minute defaults to the current minute. The adjustable range is from 0 – 59.
Blower Hours
Displays the number of hours that the blower has been active since the last time this value was
reset. You can reset this value to zero if desired (e.g., each time you give the device to a new patient).
Note: The Machine Hours displayed on the Information screen indicates the total number of hours that the blower
has been working over the life of the device. This value cannot be reset.
Therapy Hours
This setting displays the total time the patient receives therapy. You can reset this value.
To Next Page
Loading...