BiPAP A40 user manual
62
To write an Event Log to the SD card:
1. Access the Setup screen in Full Menu Access mode.
2. Select the “Write Event Log to SD Card” option from the main menu.
a. While writing is in progress, a conrmation box with the message
“Writing in Progress” appears.
b. When writing is complete, a conrmation box with the message
“Writing Successful” appears.
c. If the write could not happen, a conrmation box with the message
“Writing Failed” appears.
Note: The SD card does not need to be installed for the device to work properly.
Note: Use only SD cards available from Philips Respironics.
For details on updating a prescription using the SD card, see Chapter 5.
7.3 Supplemental Oxygen
Oxygen may be added anywhere in the patient circuit provided that a pressure valve is placed in-
line between the device and the oxygen source. Refer to the oxygen warnings in Chapter 1 when
using oxygen with the device.
7.4 Nurse Call System
You can use an institutional Nurse Call system with your device. There are several Philips
Respironics cables available to connect a nurse call system to the ventilator. Refer to the instructions
included with your cable assembly for details.
7.5 Remote Alarm Unit
You may use a Philips Respironics Remote Alarm unit with your device. There is a dedicated adapter
cable assembly for connecting the device to the Remote Alarm unit. Refer to the instructions
included with your Remote Alarm unit and adapter cable assembly for details.
To Next Page
Loading...