Philips BT4080 - Additional Features; Charging Mobile Devices; Volume Adjustment

8 EN
5 Other features
Listen to an external device
With this speaker, you can also listen to an
external audio device such as an MP3 player.
Note
• Make sure that there is no Bluetooth connection, or
music playback through Bluetooth is paused.
1 Connect an audio input cable (not
supplied) with a 3.5 mm connector on
both ends to
• the AUDIO IN socket on this speaker,
and
• the headphone socket on the external
device.
» The speaker switches to audio-in
mode automatically.
2 Play audio on the external device (refer to
its user manual).
AUDIO IN
Charge your mobile devices
You can charge your mobile devices through
the USB socket.
Note
• The USB socket is for charging only.
1 Connect this speaker to AC power.
2 Connect this speaker to your mobile
device with a USB cable (not supplied).
» Once the device is recognized, the
charging starts.
Adjust volume
During play, press + or - repeatedly to increase
or decrease the volume level.
Tip
• To increase or decrease volume continuously, press and
hold + or - for 2 seconds.
• When the volume reaches the maximum or minimum,
theLEDindicatorashestwice.
CHARGING