Philips BT4080 - Using Bluetooth Devices; Connecting a Device; Connecting via NFC; Manual Connection

6 EN
4 Use Bluetooth
devices
With this speaker, you can listen to audio from
Bluetooth-enabled devices and control the
incoming call through Bluetooth.
Connect a device
Note
• Make sure that your Bluetooth device is compatible
with this speaker.
• Before pairing a device with this speaker, read its user
manual for Bluetooth compatibility.
• The speaker can memorize a maximum of four paired
devices.Thefthpaireddevicewillreplacetherstone.
• Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
• The operational range between this speaker and a
Bluetooth device is approximately 10 meters (30 feet).
• Any obstacle between this speaker and a Bluetooth
device can reduce the operational range.
• Keep away from any other electronic device that may
cause interference.
Option 1: Connect a device through
NFC
Near Field Communication (NFC) is a
technology that enables short-range wireless
communication between various NFC
compatible devices, such as mobile phones and
IC tags.
If your Bluetooth device supports NFC, you can
connect it with this speaker easily.
1 On your device, enable NFC and
Bluetooth functions (refer to the user
manual of the device).
2 Press on this speaker.
» TheLEDindicatorashesblue.
3 Touch the NFC tag on the top of the
speaker with the NFC area of your
Bluetooth device.
4 On your Bluetooth device, accept the
pairing request with "PHILIPS BT4080".
If necessary, input “0000” as the pairing
password.
5 Follow the on-screen instructions to
complete the pairing and connection.
» After successful connection, the
speaker beeps twice, and the LED
indicator turns solid blue.
Option 2: Connect a device manually
1 Press .
» TheLEDindicatorashesblue.
2 On your Bluetooth device, enable
Bluetooth and search for Bluetooth devices
that can be paired (see the user manual of
the device).
3 When [Philips BT4080] is displayed on
your device, select it to start pairing and
connection. If necessary, input “0000” as
the pairing password.
» After successful pairing and connection,
the speaker beeps twice, and the LED
indicator turns solid blue.
• Ifyoufailtond[Philips BT4080] for
pairing, press and hold PAIRING for
two seconds to enter pairing mode
rst.
LED indicator Description
Flashing blue Connecting;
Waiting for pairing
Solid blue Connected