9EN
5 Other features
Listen to an external device
With this speaker, you can also listen to an
external audio device such as an MP3 player.
Note
• Make sure that music playback through Bluetooth is
paused.
1 Connect an audio input cable (not
supplied) with a 3.5 mm connector on
both ends to
• the AUDIO IN socket on this speaker,
and
• the headphone socket on the external
device.
2 Play audio on the external device (refer to
its user manual).
Charge your mobile devices
You can charge your mobile devices through
the CHARGING socket.
Note
• The USB socket is for charging only.
In AC power supply mode, connect to your
mobile device with a USB cable (not supplied).
» Once the device is recognized, the
charging starts.
Adjust volume
Rotate the volume knob to increase or
decrease the volume.
Reset the speaker
If the system works abnormally, reset the
speaker to factory default settings.
Press the reset button with the tip of a pen or
toothpick.
» All settings are reset to factory default.
CHARGING
To Next Page
Loading...
