Philips BTB4800 - Program Tracks and Bluetooth Playback

10 EN
2 Press / to select a track or a
le.
Program tracks
This function allows you to program
20 tracks in the desired sequence.
1 In stop mode, press to
activate the program mode.
»
is displayed.
2 For MP3 tracks, press / to select
an album.
3 Press / to select a track, and
then press
to conrm.
4 Repeat steps 2 to 3 to program
more tracks.
5 Press to play the programmed
tracks.
To erase the program
Press
twice.
Play from Bluetooth-
enabled devices
Note
•
Compatibility with all Bluetooth devices is
not guaranteed.
• Any obstacle between the unit and the
device can reduce the operational range.
• The eective operation range between this
unit and your Bluetooth enabled device is
approximately 25 meters (82 feet).
• The unit can memorize up to 8 previously
connected Bluetooth devices.
Philips BTB4800
BTB4800
1 Press to select the Bluetooth
source.
»
(Bluetooth) is displayed.
» The Bluetooth indicator ashes
blue.
2 On your device that supports
Advanced Audio Distribution Prole
(A2DP), enable Bluetooth and
search for Bluetooth devices that
can be paired (refer to the user
manual of the device).
3 Select ' BTB4800' on your
Bluetooth enabled device and
if necessary input '0000' as the
paring password.
» After successful pairing and
connection, the Bluetooth
indicator turns solid blue, and
the unit beeps.
4 Play audio on the connected
device.
» Audio streams from your
Bluetooth enabled device to this
product.
• If you fail to search for ‘
BTB4800’ or cannot pair with
this product, press and hold