Philips BTB7150 - DAB+ Radio Features

13EN
To tune to a station from the available station
list:
In DAB+ mode, press
/ repeatedly to
navigate through the available DAB+ stations.
Store DAB+ radio stations
automatically
Note
•
New stations and services will be added in DAB+
broadcast from time to time. To make new DAB+
stations and services available, perform full scan
regularly.
In DAB+ mode, press SCAN.
» The unit scans and stores all the available
DAB+ radio stations, and broadcasts the
rstavailablestation.
Store DAB+ radio stations manually
Note
•
You can store a maximum of 20 preset DAB+ radio
stations.
1 Tune to a DAB+ radio station.
2 Press PROG for three seconds to activate
the storing mode.
3 Press / to select a channel.
4 Press PROGtoconrm.
» The name of the preset station is
displayed.
5 Repeat above steps to store more DAB+
stations.
Note
•
To remove a pre-stored DAB+ radio station, store
another station in its place.
Select a preset DAB+ radio station
In DAB+ mode, press / to select a preset
number, and then press OKtoconrm..
Show DAB+ information
While listening to DAB+ radio, press INFO/
RDS repeatedly to scroll through the following
information (if available):
• Station Name
• RDS TEXT message
• Dynamic Label Segment
• Program Type
• Ensemble Name
• Frequency
• Signal error rate
• Bit rate
• Audio status (DAB, DAB+)
• Time
• Date
Use DAB+ menu
In DAB+ mode, press MENU to access DAB+
menu.
1 Press / to scroll the menu options:
• [Full scan] (full scan): scan and store all
the available DAB+ radio stations.
• [Manual] (manual): tune to a DAB+
station manually.
• [Prune] (prune): remove all the invalid
stations from the station list.
• [System] (system): adjust system
settings.
2 To select an option, press OK.
3 If a sub-option is available, repeat steps
2- 3.
[System] (system)
• [Reset] (reset): reset all settings to factory
default.
• [BT RESET] (Bluetooth reset): reset
Bluetooth settings to factory default.
• [UPGRADE] (upgrade): upgrade software
if available.