Philips BTM2325 - Program Tracks; Play from Bluetooth-Enabled Devices

11EN
Program tracks
This function allows you to program 20 tracks
in the desired sequence.
1 In stop mode, press PROG to activate the
program mode.
» [PROG] (program)and[001 PR 01]
are displayed.
2 For MP3 tracks, press / to select an
album.
3 Press / to select a track, and then
press PROGtoconrm.
4 Repeat steps 2 to 3 to program more
tracks.
5 Press to play the programmed tracks.
» During play, [PROG] (program)is
displayed.
To erase the program
Press
twice.
Play from Bluetooth-enabled
devices
Note
•
The effective operation range between the unit and
your Bluetooth enabled device is approximately 10
meters(30feet).
• Any obstacle between the system and the device can
reduce the operational range.
• Compatibility with all Bluetooth devices is not
guaranteed.
1 Press to select the Bluetooth source.
» [BT] (Bluetooth)isdisplayed.
» TheBluetoothindicatorashesblue.
2 On your device that supports Advanced
AudioDistributionProle(A2DP),enable
Bluetooth and search for Bluetooth devices
that can be paired (refer to the user
manualofthedevice).
3 Select “Philips BTM2312” or “Philips
BTM2325” on your Bluetooth enabled
device and if necessary input '0000' as the
paring password.
» After successful pairing and connection,
the Bluetooth indicator turns solid
blue, and the unit beeps twice.
4 Play audio on the connected device.
» Audio streams from your Bluetooth
enabled device to this product.
• If you fail to search for
“Philips BTM2312” / “Philips
BTM2325” or cannot pair with this
product, press and hold
/PAIRING
for three seconds until you hear a
beep sound to enter pairing mode.
Philips BTM2312
Philips BTM2325