Philips CAM110 - Charging the Built-in Battery

8 EN
Select a special effect
1  to enter
special effect setting.
2 Press +/- to select a special effect.
3 Press 

 Or press
to cancel and go back to

Charge the built-in battery
1 Press at the bottom of the camcorder
to eject the USB connector.
2 Connect the USB connector to a USB
socket on a PC.
» The status indicator on the shutter

3 Wait until the status indicator stops

» The built-in battery is fully charged.
Tip


 It takes about 3 hours to fully charge the built-in
battery via the PC.
You can also charge the camcorder via a USB
adaptor (not supplied) connected to mains
power. The charge time is about 2 hours.
UK
EUR
All manuals and user guides at all-guides.com