Philips CD163 - Page 7

PLAY
SELECTING ANOTHER TRACK (<< p>#)
¢ Press >» or i (less than 0.5 seconds) until the
desired track number appears under TRACK.
- Themusicstops anda momentiater the selected
track begins to play.
SEARCHING FOR A PASSAGE (<< p>)
e Hold «« down to search backwards to the
beginning.
¢ Hold »» down to search forwards to the end.
The search speed is determined by how long a key is
pressed:
— the first 2 seconds fairly slowly, with sound;
- then at the maximum speed, with no sound.
If you reach the end of the last track and release >»,
play will resume a few seconds before the end of the
CD.
STARTING WITH A PARTICULAR TRACK (<< >>)
e Press »» or i«« (less than 0.5 seconds) until the
desired track number appears under TRACK.
e Press PLAY.
- Play starts from the selected track.
PLAYING THE CDIN RANDOM ORDER (SHUFFLE)
e Press SHUFFLE before or during play.
- If the CD compartment was open, it will now
close.
— SHUFFLE lights up and all the tracks are now
played in a random order.
e Press SHUFFLE again if you wish to return to
normal play.
If you press <, you will return to a track which has
already been played.
If you press >», you will select any one of the following
tracks.
lf you press REPEAT twice, the tracks will be re-
peated in a different order each time, although the
first track played will always be the same.
REPEATING PLAY (REPEAT)
popes a track:
Press REPEAT before or during play.
— REPEAT 1 lights up, the track willnow be repeated
continuously.
¢ Press REPEAT twice to stop the track being
repeated.
nepeang the CD:
Press REPEAT twice before or during play.
— REPEAT lights up, the CD will now be repeated
continuously.
e Press REPEAT again to stop the CD being
repeated.
NOTE
The following functions can only be operated
using the remote control. In CD163 the RC5-IN
must be connected to an amplifier or HiFi System
with 'SCAN' or 'TIME' on its Remote Control.
SCANNING A CD (SCAN)
e Press SCAN before or during play.
— If the CD compartment was open, it will now
close.
~ SCAN lights up for 2 seconds and the first 10
seconds of each track are played in turn, 10
seconds are counted down each time under
TRACK TIME.
e¢ When the player reaches a track which you wish
to hear in full, press SCAN again or PLAY.
CALLING UP OTHER TIME INFORMATION
TIME
¢ Press TIME whenever you want to know the
remaining playing time of the track being played.
e Press TIME again if you wish to know the
remaining playing time of the entire CD (TOTAL
TIME).
e Press time again if you wish to return to the
elapsed playing time indication of the current
track (TRACK TIME).
PCS 64113 _