Philips CE131 - Replace Fuse; Remove Unit from Dashboard

20
 
interface reading all speed support

 Memory cards (SD / SDHC)
Supported formats:
 
FAT32
 MP3 bit rate (data rate): 32-320 Kbps
and variable bit rate
 
 Supported sampling frequencies: 44.1

 Directory nesting up to a maximum
of 8 levels
 Number of albums/ folders: USB or
memory maximum 99
 
memory maximum 999
 ID3 tag v2.0 or later
Unsupported formats:
 Empty albums: an empty album is an
album that does not contain MP3/

display.
 


ignored and not played.
 
 

 
9 Product
information
Note
 Product information is subject to change without prior
notice.
Power supply 
negative ground
Fuse 15 A
Suitable speaker
impedance
4 - 8
Maximum power
output
50 W x 4 channels
Continuous power
output
22 W x 4 RMS (4
10% T.H.D.)
Pre-Amp output
voltage
2.5 V
Aux-in level 500 mV
Dimensions (W x H
x D)
182 x 52 x 144.7 mm
Weight 0.86 kg
Radio
Frequency range
- FM
87.5 - 108.0 MHz (100kHz
per step in auto search and
50kHz per step in manual
search)
Frequency range
- AM (MW)
522 - 1620 KHz (9 kHz)
530 - 1710 kHz (10 kHz)
Usable sensitivity
- FM
8 µV
Usable sensitivity
- AM(MW) (S/N
= 20 dB)
30 µV
Compatible USB devices:
 
interface reading all speed support

EN