Philips CEM250 - Voice Dialing; Make a Call

21
To dial a number directly, select [DIAL NUM].
1 Press 0-9 to enter phone number.
Press •
/ to change a number.
Press •
to reset entered numbers.
2 Press to dial.
To use a number in call log or directory, select
the options other than [DIAL NUM].
1 Tur n to select a number from call log
or directory.
2 Press to dial.
Call waiting
If there is another incoming call during call,
[CALL WAITING] fl ashes on the display panel.
1 Press to terminate the present call.
The other call is automatically »
answered.
The fi rst call is terminated.»
Call transfer
You can transfer voice from loudspeaker to
mobile phones during call.
1 Press .
» [TRANSFER] is displayed.
Terminate call
a Press to terminate call.
Play audio fi les
You can listen to audio from a bluetooth device
and control playback with the unit.
1 Press SOURCE repeatedly to select [BT
MUSIC].
To play, press • 1,
.
To pause, press • 1,
again.
English
EN