Philips CSM1000 Specifications

Philips
Car active subwoofer
8"
550W Peak
CSM1000
Rich bass on the go
Feel the rich bass coming from the Philips In-car subwoofer CSM1000. Place it anywhere in
your car - it is so slim it fits under the seat. The built-in amplifier generates 85W RMS power
while specially tuned filters produce dramatic sound.
Easy to use and install
• Slim design for placement under the seat
• Built-in amplifier to ensure best matched sound quality
• Simple wires plug-in for designated speaker terminals
• High level input for connection to audio signal source
High power, low distortion
• 85W RMS power handling
• Low distortion amplifier for original sound reproduction
• Variable low-pass-filter for dramatic sound effects
• Fiber-composite cone delivers sound with lowest distortion
High durability, sustainable performance
• MOSFET power supply for optimum energy efficiency
• Aluminum heat sink boosts heat flow and prevents overheating
• Multiple protection mechanism for power disruptions

Philips CSM1000 Specifications

Sound

output power	550W
class	AB
number of channels	1
total harmonic distortion	0.08%
signal to noise ratio	>100dB
frequency response	30-135 Hz
impedance	4 Ohm

Connectivity

line level input	2 sets
high level input	1 set

Loudspeakers

number of loudspeakers	1
speaker type	Subwoofer

Woofer

diaphragm	Cone
diaphragm material	Fiber-composite
magnet	Ferrite
surround	Rubber

Sound Enhancement

low-pass-filter	-12dB/oct
input level control	0.3mV - 6V

Power Management

power supply	12V DC

Dimensions

product dimensions (W x H x D)	240 x 80 x 350 mm