Philips CSS5235Y/93 - MP3 Player; USB Storage Devices

14
EN
1 Enable NFC on the Bluetooth device
(see the device' s user manual for
details).
2 Tap the NFC device on the NFC tag
of this product until you hear a beep
sound from this product.
» The blue LED on the right base
speaker lights up, and the NFC
device is connected to this product
via Bluetooth.
» If the connection fails, the blue LED
on the right base speaker blinks
continually.
3 Select and play audio les or music on
your NFC device.
• To break the connection, tap again
the NFC device with the NFC tag
on this product.
MP3 player
Connect your MP3 player to play your
audio les or music.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
1 Using the 3.5mm stereo audio cable,
connect the MP3 player to the
AUDIO IN connector on the right
base speaker.
2 Press the buttons on the MP3 player
to select and play audio les or music.
3 Press once or two times AUX on the
remote control until higher volume is
heard.
• On the MP3 player, it is
recommended to set the volume
in the range of 80% maximum
volume.
USB storage devices
Enjoy audio on a USB storage device, such
as an MP3 player and USB ash memory,
etc.
What you need
• A USB storage device that is
formatted for FAT or NTFS le
systems, and complies with the Mass
Storage Class.
• An MP3 or WMA le on a USB
storage device
1 Connect a USB storage device to this
product.
2 Press USB on the remote control.
3 Use the remote control to control
play.
Button Action
Start, pause or resume play.
/ Skip to the previous or next track.
USB During play, press to toggle: repeat
all tracks and repeat off.
Repeat play indicator
• If repeat mode is turned on,
the white LED indicator on the
main unit blinks once.
• If repeat mode is turned off,
the white LED indicator on the
main unit blinks twice.
CSS5235Y_93_UM_V1.0.indb 14 4/24/2015 3:50:58 PM