Philips D150 - Phonebook; Register Additional Handsets; Restore Default Settings; Call Log

4
Enjoy
Phonebook
Add record
1 Press .
2 Select [phonebook] > [add new].
3 Follow on-screen instructions.
Call from the phonebook
1 Press
.
2 Select a record and press .
Direct access memory
You have 2 direct access memories (Keys 1 and 2).
To dial the saved phone number automatically, press
and hold on the keys in standby mode.
Depending on your country, keys 1 and 2 are preset
to [1_voicemail] (voice mail number) and
[2_info svc] (information service number)
of your network operator respectively (network
dependent).
Call log
Call from the call log
1 Press .
2 Select a record and press .
Add record
1 Press
> > [save number].
2 Follow on-screen instructions.
Delete record
1 Press
> > [delete].
2 Follow on-screen instructions.
Redial list
Call from the redial list
1 Press .
2 Select a record and press .
Add record
1 Press
> > [save number].
2 Follow on-screen instructions.
Delete record
1 Press
> > [delete].
2 Follow on-screen instructions.
Register additional handsets
You can register additional handsets to the base station.
1 Press and hold on the base station for 5 seconds.
2 Press .
3 Select [services] > [register], then press
toconrm.
4 Enter the system PIN/passcode (0000).
5 Press toconrmthePIN/passcode.
»
Registration is complete in less than 2 minutes.
Restore default settings
You can reset your phone settings to the original
factory settings.
1 Press .
2 Select [services] > [reset], then press
toconrm.
3 Follow on-screen instructions.
Note
•You may recall the original PIN/Passcode by
following this procedure.