Philips DCM276 - Troubleshooting; General Troubleshooting Advice; Power and Sound Troubleshooting; Unit Response and Disc Issues

20
Remote control does not work
%HIRUHSUHVVLQJDQ\IXQFWLRQEXWWRQÀUVW
select the correct source with the remote
control instead of the main unit.
Reduce the distance between the remote 
control and the unit.
Insert the battery with its polarities 
(+/– signs) aligned as indicated.
Replace the battery.
Aim the remote control directly at the 
sensor on the front of the unit.
&DQQRWGLVSOD\VRPHÀOHVLQ86%GHYLFH
7KHQXPEHURIIROGHUVRUÀOHVLQWKH86%
device has exceeded a certain limit. This
phenomenon is not a malfunction.
7KHIRUPDWVRIWKHVHÀOHVDUHQRW
supported.
USB device not supported
The USB device is incompatible with the 
unit. Try another one.
Poor radio reception
Increase the distance between the unit 
and your TV or VCR.
Fully extend and adjust the FM antenna.
Clock/timer setting erased
Power has been interrupted or the power 
cord has been disconnected.
Reset the clock/timer.
Timer does not work
Set the clock correctly.
Switch on the timer.
EN
Downloaded From Disc-Player.com Philips Manuals