Philips DCM292/12 - 6 Play options; Pause and Resume Playback; Track Control and Options; Programmed Track Playback

17
Program tracks
Note
You can program tracks only when the play 
stops.
You can program a maximum of 40 tracks.
1 Press PROG/CLOCK SET to activate the
program mode.
[» PROG] (program) is displayed.
2 For MP3/WMA tracks, press / to
select an album.
3 Press / to select a track, then press
PROG/CLOCK SETWRFRQÀUP
4 Repeat steps 2 to 3 to program more
tracks.
5 Press to play the programmed tracks.
During play, [» PROG] (program) is
displayed.
To erase the program, in the stop 
position, press
.
Display time
1
Press DISPLAY to display time.
Tip
In Eco Standby mode, time is displayed for 90 
seconds.
Adjust volume level
1
During play, press VOL +/- to increase/
decrease the volume level.
Mute sound
1
During play, press to mute/unmute
sound.
6 Play options
Pause/resume play
1
During play, press to pause/resume
play.
Skip to a track
For CD:
1 Press / to select another track.
To select a track directly, you can 
also press a key on the numerical
keypad.
For MP3 disc and USB:
2 Press to select an album or a folder.
3 Press / WRVHOHFWDWUDFNRUDÀOH
Search within a track
1
During play, press and hold / .
2 Release to resume normal play.
6HOHFWUHSHDWVKXIÁHSOD\
options
1
During play, press REPEAT/SHUFFLE
repeatedly to select a repeat option or
WKHVKXIÁHSOD\PRGH
[
]: the current track is played
repeatedly.
[
]: all tracks are played
repeatedly.
[
]: all tracks in this album are
played repeatedly.
[
]: all tracks are played randomly.
2 To resume normal play, press
REPEAT/SHUFFLE repeatedly until no
option is displayed.
English
EN