Philips DST7510/80 - Instructions; Disassembly Instruction

Published by Philips Domestic Appliances Page 10 of 26 For internal use only
Document No. : CSW-07-081-22188
4.Instructions
4.1 Disassembly Instruction
Before dismantling : Ensure the plug is disconnected from the mains and Soleplate is not hot.
DECO PLATE 14 & BACKPLATE 2
WIRE CONNECTION
DECO PLATE 14
ASO 1
FILLING DOOR
WATER TANK ASSY 7
INLAY STICKER
LAMP ASSY 9
TANK TOP SEAL 15
BALL SWIVEL 10
SPRAY KNOB 8
BACKPLATE 2
INLAY ASSY 5
MAINSCORD 6
THERMOSTAT DIAL 11
THERMOSTAT BUSH
BULLET MOLDED 12 & BULLET SPRING 13
CALC COLLECTOR ASSY 3
CLAMPING PLATE
COVER & SOLEPLATE ASSY 4
Remove
2x Screw A
Remove
2x Screw C
Remove
DECO PLATE 14 & BACKPLATE 2
Disconnect
All wire coneection
Remove
DECO PLATE 14
Remove
ASO 1
Open
FILLING DOOR
Remove
WATER TANK ASSY 7
Remove
INLAY STICKER
Remove
LAMP ASSY 9
Remove
TANK TOP SEAL 15
Remove
BALL SWIVEL 10
Remove
Screw T
Remove
BACKPLATE 2
Remove
SPRAY KNOB 8
Remove
MAINSCORD 6
Remove
INLAY ASSY 5
Remove
THERMOSTAT BUSH
Remove
THERMOSTAT DIAL 11
Remove
CALC COLLECTOR ASSY 3
Remove
BULLET MOLDED 12 & BULLET
SPRING 13
Remove
COVER & SOLEPLATE ASSY 4
Remove
2x Screw B
(Refer to step 13 to 20 for detail instruction)
0
Remove
CLAMPING PLATE
(Refer to step 1 to 12 for detail instruction)