Philips DVDR 615/17 - Programming a Recording Without the VCR Plus+ System

66
Programming a recording without the
VCR Plus+
®
system
1
Switch on the TV. Select the channel number for the DVD
Recorder (channel 3 or 4 or the Audio/Video In channel).
2
With the Recorder on, press TIMER on the remote control.
The programming method selected last is marked.
Timer
Timer Programming
Date
01/22
Ch.
01
Start
08:30AM
End
10:30AM
Rec
Mode
M1
Mo-Fr/Weekly
Press SELECT
To store
Press OK
3
Select line 'Timer Programming' using CH- B or CH+ A and
confirm with C .
The information will be displayed.
4
Select the entry field with D or C .
5
Enter information with CH- B , CH+ A or the number buttons
0..9 .
In the entry field 'Date', you first enter the month and then the
date.
Selecting daily/weekly recordings
In 'Date' use SELECT to select from the following options:
'Mo-Fr': Repeated daily recordings from Monday to Friday
'Mo': Repeated weekly recordings (every week on the same day, e.g.
Monday).
Change 'AM/PM'
Use the SELECT button to select 'AM'or'PM' in the input fields
'Start' and 'End'.
Changing the recording quality
Select the 'RecMode' input field using C .
Use CH- B , CH+ A to select the recording mode.
Tip
6
If all information is correct, press the OK button. The
information is stored in a TIMER block.
7
To end, press TIMER .
The disk you have inserted will be checked.
8
Search the position on the disc where the recording should begin.
9
Switch off with STANDBY m .
The programmed recording will only function properly when the
DVD Recorder has been switched off using the
STANDBY m button.
If any of the TIMER blocks are in use, 'TIMER' will light up on the display.
Programming a recording (TIMER)