Philips AVS
DVDR3320V/37 Firmware Upgrade
Firmware Upgrade
We have developed a firmware upgrade to improve your product.
This firmware version improves:
Click here for more details
1. This is the latest software available which has been installed in your set at the factory. There are currently no
new software releases.
Upgrade Procedure
Check your current version
First check your current firmware version to see if you need to upgrade:
• With power on, press and hold the Record and Play button on the Front panel for 5 seconds
=> DVD Software and LOADER Software version will be displayed.
Download Firmware upgrade
Click the link to save the software on your computer.
Burning Upgrade on CD-R / CD-RW
1. Extract the files by unzipping the zipped file. (Do not rename the filename)
2. Write the extracted files – not the zip file – onto a blank CD-R or CD-RW disc,
using the following settings:
- File System CD-ROM Joliet
- File name length : max 31 chars (ISO Level 2)
- Mode : 2/XA
- Character set : ASCII
- Single session
- Write Speed : Low
3. Finalized the disc. (The application may do this automatically.)
Tip: For more
information on burning
software we refer to
two popular burning
software programs
www.nero.com
www.easycdcreator.com
Ste
4
Apply Upgrade to your Set
1. Insert the disc what you made into the tray.
2.
PRESS REC
will be displayed on the screen.
3. Press REC button and the software starts.
4. The tray will be opened.
5. The set will auto-reboot and the upgrading progress completed.
Note: Do not press any buttons or interrupt the mains supply during the entire upgrading process, otherwise
the set may become defective.
Your product is successfully upgraded!
To Next Page
Need help?
Operating Environment
Power
Weight and Dimensions
