Philips DVDR3320V Quick Use Guide

QUICK USE GUIDE
SGP/SL/0512_02
DVDR3320VR
1 Remove the antenna cable plug from your TV (or Satellite
Receiver/Cable Box). Connect it to the AERIAL input
socket at the back of the DVD recorder.
2 Use the supplied antenna cable to connect the DVD
recorder’s RF.OUT output socket to the antenna input
socket at the back of your TV set.
3 Use the scart cable to connect the DVD recorder’s EURO
AV1 AUDIO/VIDEO socket to the SCART socket at the
back of your TV set.
4 Connect the power cable from the DVD recorder’s
~ MAINS to the power supply.
Helpful Hints:
If your TV does not have the above-mentioned
connectors, please refer to the user manual for more
information on others possible connection to your
TV set.
Prepare the remote control
1 Press STANDBY-ON 2 on the DVD recorder to switch
it on.
2 Switch on the TV set and select the correct video in channel.
NO PICTURE! Press the CHANNEL 3 4 button on the TV to
select the correct video in channel, for example, 'EXT', '0', or 'AV'.
3 Press SYSTEM MENU to access the setup menu.
Press 3 4 to select an item in the menu.
Press 2 to access the next level options.
Press 1 to go back previous level options.
When you complete, press OK to confirm your selections
and press SYSTEM MENU to exit.
● Channel auto search,
In {GENERAL} select {Auto Programming}.
Press 2 to start automatic TV channel search.
Once the TV channel search complete, the total number of
channels will be saved in the tuner’s memory.
● Clock set,
In {GENERAL} select {Clock Set}.
Press OK to confirm the time and clock setting.
Press 3 4 to change the first digit and press 1 2 to go to the
previous or next digit field.
Once complete, press OK to confirm.
The DVD recorder is ready for use!
See next page for basic recording and playback.
Start first installation Connect DVD recorder
1 3
1
3
2
2
AERIAL
RF.OUT
STANDBY
ON
OPEN
DIRECT
DUBBING
CHANNEL
DVD
DVD
VCR
VCR
OPEN/CLOSE
VCR
DVD
SOURCE
RECORD PAUSE
PLAY
REWSTOP
F.FWD
EJECT
RETURN
TV/VIDEO
DVD VCR
OPEN/CLOSE
STOP
D.DUBBING REW FWD RECORD
THUMBNAIL CHAPTER TIMER REC MODE
REPEAT TITLE AUDIO ZOOM
SEARCH MARKER
SHOWVIEW
PAUSE/STEP
PLAY
MENU
LIST/DISC
SYSTEM
MENU
DISPLAY
CLEAR
VIDEOPLUS +
OK
OK
2
3
1
1
2
3
4
DVD recorder
back panel
ANTENNA/
CABLE SIGNAL
English
All manuals and user guides at all-guides.com
all-guides.com

Philips DVDR3320V Specifications

Operating Environment

operating temperature	5˚C to 35˚C
operating humidity	5% to 90%

Power

power requirements	AC 220-230V, 50 Hz
power consumption	35W

Recording

recordable time DVD	1 hour (XP mode), 2 hours (SP mode), 4 hours (LP mode), 6 hours (EP mode)
recordable time DVD+R DL	1 hour 50 minutes (XP mode), 3 hours 40 minutes (SP mode), 7 hours 10 minutes (LP mode), 11 hours (EP mode)
video recording sampling frequency	27MHz

Playback

frequency response DVD (PCM 48 kHz)	8 Hz to 22 kHz
frequency response CD	8 Hz to 20 kHz
frequency response DVD (PCM 96 kHz)	8 Hz to 44 kHz

Inputs

aerial input	75 ohms
video input	1.0 Vp-p 75 ohms, sync negative, RCA jack x 1 / SCART x 2
audio input	0 dBm more than 47 kohms, RCA jack (L, R) x 1 / SCART x 2

Weight and Dimensions

dimensions	430 X 78.5 X 354 mm
mass	5.7 kg