Philips DVDR3380 Service Instructions

Published by KC-TE 0617 AV Systems Printed in the Netherlands Subject to modification EN 3139 785 31810
DVDR3380
DVD Recorder
Service Instruction
CLASS 1
LASER PRODUCT
Contents Page
1 Technical Specifications and Connection Facilities 2
2 Test Disc & Repair Hints 5
3 Firmware Upgrading 6
4 Service Flow chart 8
5 Directions For Use 13
©
Copyright 2006 Philips Consumer Electronics B.V. Eindhoven, The Netherlands.
All rights reserved. No part of this publication may be reproduced, stored in a
retrieval system or transmitted, in any form or by any means, electronic,
mechanical, photocopying, or otherwise without the prior permission of Philips.
Version 1.0
DVDR3380/05/31/51/58
The 2006 range DVD Recorder products are repaired centrally.
Defective sets must be identified, labelled and stored for pick-up.
This document gives full instructions for a functional check.
Technical information to repair faulty sets is therefore not provided in this document.
To test in-coming sets the following must be performed:
1. Verify / Reproduce the customer’s problem
2. Verify that set has latest Firmware (see chapter 3) and upgrade if it is not the latest version.
3. Full functional check

Philips DVDR3380 Specifications

Picture/Display

D/A converter	10 bit, 54 MHz
A/D converter	10 bit, 27 MHz

Sound

D/A converter	29 bit, 192 kHz
A/D converter	24 bit, 96 kHz

Power

Power supply	50Hz, 220-240V
Standby power consumption	< 3 W
Power consumption	27 W (Typical)

Weight and Dimensions

Set dimensions	360 x 43 x 322 mm
Packaging dimensions	498 x 124 x 413 mm
Set weight	3 kg