4-1
4. Disassembly introductions
4.1Disassemble the TOP-COVER:
Step 1:
Loosening the fixed screws of the TOP-COVER totally 6 screws, 4 on the rear panel
and 1 on the left side and the other on the right side of the TOP-COVER, (as PICTURE
1 & 2 & 3)
(PICTURE 1) (PICTURE 2)
(PICTURE 3)
Step 2:
Pull back to remove the TOP-COVER and let the cover-top lie on horizontally
smooth desk to prevent being out-of-shape place upside down (as PICTURE 4)
(PICTURE 4)
http://www.jdwxzlw.com/?fromuser=华盛维修