Philips DVDR520H - Disassemble the Drive

4-2
4.2 Disassemble the Drive:
(PICTURE 5) (PICTURE 6)
(PICTURE 7 ) (PICTURE 8)
Step 1: Tray out Æ pull out the door and lift up to disassemble the tray door (as
PICTURE 6)
Step 2: Tray in Æ Power off Æ unplug the power cord
Step 3: Disassembly the top cover
Step 4: Unplug the power cord and IDE cable (as PICTURE 5)
Step 5: Remove the four fixed screws of the drive (screw 1~4 as PICTURE 7 &8)
Step 6: Remove the Drive
PS: If the tray is jammed can’t be out on step 1, please unplug the power cord
first ,then follow the step 3-5 ,and then lift up the drive on the rear side to separate
Power cord
1
2
3
4
SCREWS SCREWS
IDE cable
http://www.jdwxzlw.com/?fromuser=华盛维修
家电维修资料网，免费下载各种维修资料