Philips DVDR520H - Recording; Recording Preparation and Cautions; Recording Television Programs

4-4
4.4 Disassemble the M/B:
(PICTURE 13) (PICTURE 14) (PICTURE 15)
(PICTURE 16 ) (PICTURE 17)
(PICTURE 18) (PICTURE 19)
Step 1: Unplug the power cord and IDE cable of the HDD module (as PICTURE 13)
Step 2: Remove the HDD module from the M/B first, unfix the 4 screws of the HDD
module (as PICTURE14, 15, 16)
Step 3: Unfixed the screw of the M/B and remove all the cable (7 cables)
connected to M/B (as PICTURE 17 & 19)
Step 4: Loosen the 5 screws off the rear panel (as PICTURE 18)
Note: Tuner can be removed and reused if isn’t broken when M/B is disassembled
SCREWS
1
2
3
4
Power cord
IDE cable
1
SCREWS
1
2
3
4 5
1
2
http://www.jdwxzlw.com/?fromuser=华盛维修
家电维修资料网，免费下载各种维修资料