Philips DVDR5350H/02 - Directions for Use

EN 7
3139 785 31532
3. Directions For Use
The following except of the Quick Use Guide serves as an introduction to the set.
The Complete Direction for the Use can be downloaded in different languages from the internet site of Philips Customer care Center:
www.p4c.philips.com
Quick Start Guide
DVDR 5350H DVDR 7300H
HDD & DVD Player / Recorder
RF coaxial cable Scart cable
G-LINK cable
& transmitterPower cable
Quick start guideRemote control
and 2 batteries
User manual
DVD recorder/hard disk
What’s in the Box
3.
Directions For Use
From
a
n off-
a
ir
a
nt
e
nn
a
or
cable
b
o
x
Television (rear
)
Phili
p
s Recorder
(
rear
)
Basic connection Before connecting
Unplug the antenna cable that is currently connected to your TV.
Connecting
1
Disconnect the antenna cable from your TV
and connect it to the ANTENNA socket on this recorder.
2
Use the supplied RF coaxial cable to connect
the TV socket on this recorder to the Antenna In socket on your TV.
3
Use the supplied scart cable to connect the
EXT1 TO TV-I/O Scart socket on this recorder to the SCART IN socket on your TV.
Note See the accompanying user manual for others possible connection (e.g. HDMI, Component Video).
4
Connect the power cable from the recorder
to an AC power outlet.
Start with the 'Basic connection'. If you have a VCR, follow the instructions for ‘Connection with VCR or similar device’. If you have a set-top box, follow the instructions for ‘Connection with set-top box’.