- 7 -
English
- 7 -
Note that the recovered information is not (yet) stored on disc as such, and the disc is
not finalised.You can choose to continue recording but considering the disc may not be
fully reliable anymore it may be wiser to finalize straight away.To rewrite the Index
Picture Screen in its restored status just perform a simple editing action like changing an
index picture or a title name.
Note:This function has no use with DVD+RW discs.
Forced Finalisation
Symptom:
When you insert a DVD+R disc the Index Picture Screen may keep flashing on the
screen.
Remedy:
1 Press OPEN/CLOSE to open the tray of the recorder and insert the corrupted
DVD+R disc. Do not close the tray.
2 Press and hold the 4 button on the remote control of the recorder for several
seconds until the tray closes.
‰ The display shows ‘FINALIZE’.The recovery procedure, technically referred to
as ‘forced finalisation’ now starts.This will take about three minutes.
‰ If the procedure is completed successfully the Index Picture Screen will reappear,
showing any recovered recordings.
Afterwards, you cannot record on this disc anymore.
Notes:
- This function does not work with discs that show the error message "Disc contains unknown
data". See ‘DVD+R disc recovery’ above for instructions how to recover such discs.
- This function has no use with DVD+RW discs.
To Next Page
Loading...
