80309 - Maximal number of retries reached by
Handle State Sending!!
80310 - Maximal number of retries (NACKs)
reached (Handle State Sending)
80311 - We tried to receive a reply for
DVIO_MAX_RETRIES_ACKREPLY times !!
80312 - We tried to receive a reply for
DVIO_MAX_RETRIES_REPLY times !!
80313 - We tried to receive an Ack for
DVIO_MAX_RETRIES_ACK times!!
80314 - VSM UART error timeout transmitting
command
80315 - VSM UART error timeout receiving reply
80316 - VSM UART frame error occurred receiv-
ing from DVIO Board
80317 - VSM UART parity error occurred receiv-
ing from DVIO Board
80318 - The confirmation/indication from the
DVIO module is invalid.
80400 - The accessibility of the DVIO module is
OK.
80401 - The DVIO Board is not present in this
DVDR.
80402 - Could not initialize I2C.
80403 - Unable to reset the DVIO module.
80404 - Unable to receive the reset indication
from the DVIO module.
80405 - Unable to send the configuration to the
DVIO module.
80406 - Unable to download the chip ID to the
DVIO module.
80407 - Unable to set the mode of the DVIO
module to IDLE.
80408 - Software Error in function Handle State
Awaiting Reply!!
80409 - Maximal number of retries reached by
Handle State Sending!!
80410 - Maximal number of retries (NACKs)
reached (Handle State Sending)
80411 - We tried to receive a reply for
DVIO_MAX_RETRIES_ACKREPLY times !!
80412 - We tried to receive a reply for
DVIO_MAX_RETRIES_REPLY times !!
80413 - We tried to receive an Ack for
DVIO_MAX_RETRIES_ACK times!!
80414 - VSM UART error timeout transmitting
command
80415 - VSM UART error timeout receiving reply
80416 - VSM UART frame error occurred receiv-
ing from DVIO Board
80417 - VSM UART parity error occurred receiv-
ing from DVIO Board
80418 - The confirmation/indication from the
DVIO module is invalid.
80501 - The DVIO Board is not present in this
DVDR.
80502 - The I2C could not be initialized.
80503 - The DVIO module could not be reset.
80504 - Unable to receive the reset indication
from the DVIO module.
80505 - Unable to send the configuration to the
DVIO module.
80506 - Unable to download the chip ID to the
DVIO module.
80507 - Unable to set the mode of the DVIO
module to IDLE.
27
To Next Page
