80508 - Software Error in Handle State Awaiting
Reply function!
80509 - Maximal number of retries reached by
Handle State Sending!
80510 - Maximal number of retries (NACKs)
reached (Handle State Sending)
80511 - We tried to receive a reply for
DVIO_MAX_RETRIES_ACKREPLY times!
80512 - We tried to receive a reply for
DVIO_MAX_RETRIES_REPLY times!
80513 - We tried to receive an
Acknowledgement for
DVIO_MAX_RETRIES_ACK times
80514 - VSM UART error timeout transmitting
command
80515 - VSM UART error timeout receiving reply
80516 - VSM UART frame error occurred receiv-
ing from DVIO Board
80517 - VSM UART parity error occurred receiv-
ing from DVIO Board
80518 - The confirmation/indication from the
DVIO module is invalid.
80519 - Setting the DVIO module in/out diagnos-
tics mode failed
80520 - Invalid input
80521 - Getting the errors of the self-test failed
80522 - Self-test failed
80601 - The DVIO Board is not present in this
DVDR.
80602 - The I2C could not be initialized.
80603 - The DVIO module could not be reset.
80604 - Unable to receive the reset indication
from the DVIO module.
80605 - Unable to send the configuration to the
DVIO module.
80606 - Unable to download the chip ID to the
DVIO module.
80607 - Unable to set the mode of the DVIO
module to IDLE.
80608 - Software Error in Handle State Awaiting
Reply function!
80609 - Maximal number of retries reached by
Handle State Sending!
80610 - Maximal number of retries (NACKs)
reached (Handle State Sending)
80611 - We tried to receive a reply for
DVIO_MAX_RETRIES_ACKREPLY times!
80612 - We tried to receive a reply for
DVIO_MAX_RETRIES_REPLY times!
80613 - We tried to receive an
Acknowledgement for
DVIO_MAX_RETRIES_ACK times!
80614 - VSM UART error timeout transmitting
command
80615 - VSM UART error timeout receiving reply
80616 - VSM UART frame error occurred receiv-
ing from DVIO Board
80617 - VSM UART parity error occurred receiv-
ing from DVIO Board
80618 - The confirmation/indication from the
DVIO module is invalid.
80619 - Setting the DVIO module in/out diagnos-
tics mode failed
80701 - The DVIO Board is not present in this
DVDR.
28
To Next Page
