28 EN
[ Analogue Output ]
Select the analogue audio setting based on
the audio device that is connected through
the analogue audio socket.
[ Stereo ]• – for stereo output.
[ LT/RT ]• – for surround sound output
through two speakers.
[ Digital Audio ]
Select the setting based on the digital
ampli er/receiver that is connected
through the digital socket.
[ Digital Output ]• – select the type of
digital output.
Option Description
[ Off ] Disable digital output.
[ All ] The device supports
multi-channel audio
formats.
[ PCM Only ] The device is not capable
of decoding multi-channel
audio. Audio is
downmixed to two-
channel sound: see
[
LPCM Output ]
setting.
[ LPCM Output ]• – select the LPCM
(Linear Pulse Code Modulation) output
sampling rate.
Option Description
[ 48kHz ] For discs recorded at
sampling rate of 48 kHz.
[ 96kHz ] For discs recorded at the
sampling rate of 96 kHz.
Note
[ Digital Audio ]• setting is only available if the
[ HDMI Audio ] is set to [ Off ].
[ LPCM Output ]
• setting is only available if the
[ Digital Output ] is set to [ PCM only ].
The higher the sampling rate, the better the sound
•
quality.
[ HDMI Audio ]
Select the audio output setting when you
connect this DVD player and the TV with
a HDMI cable.
[ On ]• – audio output through the TV.
[ Off ]• – disable audio output from the
TV.
[ Audio Sync ]
Set the default delay time for audio output
when you play a video disc.
Press 1. OK.
Press 2. b B to set the delay time.
Press 3. OK to con rm and exit.
[ Volume ]
Set the default volume level when you play
a disc.
Press 1. OK.
Press 2. b B to set the volume.
Press 3. OK to con rm and exit.
To Next Page
Loading...
