Philips DVP3570 - Basic Setup; Before You Start; Finding the Viewing Channel on Your TV

12 EN
BEFORE YOU START
After you have completed all the connections, you must find the viewing channel (external input channel) on your TV.
1
After you have made all the
necessary connections, press
[
y
y
(standby-on)] to turn on the unit.
2
Turn on your TV.
3
Press the button on the TV’s remote
control that accesses the external
input channel. It may be labeled
“SOURCE”, “AV” or “SELECT” (refer to
your TV’s user manual). Or press “2”
on the TV’s remote control, then
press channel down button
repeatedly until you see the opening
screen.
This is the correct viewing channel (external
input channel).
Finding the Viewing Channel on Your TV