Mechanical and Dismantling Instructions
Dismantling Instruction
St
ep3: If the tray can’t open in normal way, you can make it through the instruction as below (Figure 3).
Note: Make sure to operate gently otherwise the guider would be damaged.
Figure 3
Step4: Dismantling Front Panel, disconnect the connectors (XP5, XP6,XP7), need release 4 snaps of Front Panel & 2 snaps
of bottom cabinet , then gently pull the Panel out from the set. (Figure 4 - Figure 6)
Figure 4
2-2
Detailed information please refer to the model set.
Free Datasheet http://www.datasheet4u.net/
To Next Page
Loading...
Need help?
General
