Philips DVP520/00 - Smart Picture; Picture Setting; Sharpness; Brightness;Contrast

/00_8239 210 98882
English
28
System Menu Options
Angle Mark
Displays current angle setting information
on the right hand corner of the TV screen
if available on the disc.
1 Press 34 to highlight ‘Angle Mark’.
2 Enter its submenu by pressing 2.
3 Move the cursor by pressing 34 to
highlight the selected item.
➜
On: Enable Angle Mark.
➜ Off: Disable the current angle setting
display.
Smart Picture
In this menu, you can choose a picture
setting from a fixed set of predefined
picture settings.
1 Press 34 to highlight ‘Smart Picture’.
2 Enter its submenu by pressing 2.
3 Move the cursor by pressing 34 to
highlight the selected item.
➜ Standard: select the standard picture
setting.
➜
Bright: make the TV picture brighter.
➜
Soft: make the TV picture softer.
Picture Setting
The options included in Picture Setting
Setup page are: ‘Sharpness’, ‘Brightness’
and ‘Contrast’.
1 Press the 34 keys to highlight an option.
2 Enter its submenu by pressing 2.
3 Move the cursor by pressing the 34 keys
to highlight the selected item.
- - Picture Setting Setup - -
Low
Sharpness High
Brightness 00 Medium
Contrast 00 Low
Sharpness
You can personalise your picture colour
by adjusting sharpness, brightness or
contrast.
➜
High: Choose high to make the
picture’s edge sharper.
➜
Medium: Choose medium to get a
standard picture.
➜
Low: Choose low to make the
picture’s edge softer.
Brightness/Contrast
Choose a positive value to increase the
brightness/contrast level or move to a
negative value to decrease the brightness/
contrast level.
01-34 DVP520_EU101 19/03/2004, 11:23 AM28