Philips DVP5982 - Changing the Password; Restoring Factory Settings

English
49
DVD Menu Options (continued)
TIPS: The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
Changing the Password
You need to enter your six-digit
password to play a prohibited disc or if
prompted for a password. The same
default password is used for both
Parental and Disc Lock.
A In ‘Preference Page’, press S T to select
{ Password }, then press X to select
{ Change }.
B Press OK and the menu appears on the
TV screen.
Old Password
New Password
Confirm PWD
OK
C Use the alphanumeric keypad 0-9 to
enter the six-digit password.
 When doing this for the  rst time,
enter the default password ‘136900’.
 If you forget your old six-digit password,
enter the default password ‘136900’.
D Enter the new six-digit password.
E Enter the new six-digit password a
second time to con rm.
 The new six-digit password will now
take effect.
F Press OK to con rm.
Setting the DivX
®
subtitle font
You can set the font type that supports
the recorded DivX
®
subtitle.
A In ‘Preference Page’, press S T to select
{ DivX
®
Subtitle }, then press X.
{ Standard }
Albanian, Danish, Dutch, English, Finnish,
French, Gaelic, German, Italian, Kurdish
(Latin), Norwegian, Portuguese, Spanish
Swedish and Turkish.
B Press OK to con rm.
Restoring to the original settings
Setting the { Default } function will reset
all options and your personal settings to
the factory defaults, except your Parental
and Disc Lock.
A In ‘Preference Page’, press S T to select
{ Default }, then press X to select
{ Reset }.
B Press OK to con rm.
 All settings will now reset to factory
defaults.
01-57_dvp5982_37_eng3.indd 4901-57_dvp5982_37_eng3.indd 49 2007-06-13 2:13:06 PM2007-06-13 2:13:06 PM