Philips DVP640 - Step 3: Setting Language Preferences; Setting the OSD Language; Setting the Audio, Subtitle and Disc Menu Languages

8239 210 98532
17
Step 3: Setting language
preferences
You can select your preferred language
settings.This DVD Player will
automatically switch to the language for
you whenever you load a disc. If the
language selected is not available on the
disc, the disc’s default language will be
used instead. The OSD (on-screen
display) language for the system menu will
remain as you set it, regardless of various
disc languages.
Setting the OSD Language
- - GENERAL SETUP PAGE - -
SCREEN SAVER
SMART POWER
DISC LOCK
PROGRAM
ENGLISH
FRENCH
SPANISH
MAIN PAGE
OSD LANGUAGE
1 Press SYSTEM MENU.
2 Press 4 3 to select ‘General Setup’ page.
3 Enter its submenu by pressing OK.
4 Use the 1 2 3 4 keys on the Remote
Control to navigate in the menu.
Move to ‘OSD Language’ and press B.
5 Select a language and press OK.
To exit from the menu
Press SYSTEM MENU.
Getting Started
Setting the Audio, Subtitle and Disc
menu languages
- - Preference Setup Page - -
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
ENGLISH
FRENCH
SPANISH
DEFAULT
AUDIO
MP3/JPEG NAV
MAIN PAGE
1 Press STOP twice, then press SYSTEM
MENU.
2 Press 4 3 to select ‘Preferences Page’.
3 Enter its submenu by pressing OK.
4 Press 3 4 to highlight one of the
following in the Preferences Page.
–‘Audio’ (disc’s soundtrack)
– ‘Subtitle’ (disc’s subtitles)
– ‘Disc Menu’ (disc’s menu)
5 Enter its submenu by pressing B.
6 Select a language and press OK.
7 Repeat steps 4~6 for other language
settings.
To exit from the menu
Press SYSTEM MENU.
01-40 DVP640_US5_pt2 (OK) 17/03/2004, 5:23 PM17