EasyManuals Logo

Philips DVP721VR/14 Quick Use Guide

Philips DVP721VR/14
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only after you
have finished hooking up everything. Never make or change connections with equipment connected to the power outlet.
2
Connect the EURO AV1 AUDIO/VIDEO on the rear panel of this DVD/VCR to the SCART input on the TV
using the SCART cable (supplied).
3
Connect your existing RF cable from the Antenna TV signal directly to the AERIAL jack on the rear of the
DVD/VCR.
If you have a Cable Box (or Satellite Receiver), connect the OUT jack of the Cable Box/Satellite Receiver to the AERIAL
jack on the DVD/VCR using an RF coaxial cable (not supplied).
4
Connect the supplied black RF coaxial cable to the DVD/VCR’s RF-OUT jack and to your TV’s ANTENNA IN
jack. The TV’s ANTENNA IN jack could be labelled 75-ohm, TV IN, or RF IN. Check your TV manual for details.
5
Connect the power cords of the DVD/VCR,TV, and Cable Box (if applicable) to a power outlet.
6
Turn on the TV power. Set the TV to a video channel. (See the accompanying DVD/VCR owner’s manual for
details.)
7
Press STANDBY-ON 2 on the DVD/VCR or its remote to turn on the DVD/VCR. The first time you turn
on the DVD/VCR, you should complete the VCR setup. See the other side of this Quick-Use Guide for details.
SCART IN
SCART IN
DVP721VR
IN
OUT
RF
CABLE
CABLE
TV SIGNAL
Antenna
Cable box (optional)
3
4
5
2
12NC: 8239 300 33292
SgpSL/0434/14_5
DVP721VR/14

Other manuals for Philips DVP721VR/14

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Philips DVP721VR/14 and is the answer not in the manual?

Philips DVP721VR/14 Specifications

Operating Environment IconOperating Environment
operating temperature range5˚C to 35˚C
operating humidity range5 % to 90 %
timer24 hours display type
Power IconPower
power requirementsAC 220-230V, 50Hz
power consumption19W
System Specifications IconSystem Specifications
laser wavelength650 nm
frequency response (DVD PCM 96 kHz)8 Hz to 44 kHz
frequency response (DVD PCM 48 kHz)8 Hz to 22 kHz
Audio and Video Outputs IconAudio and Video Outputs
video out1 Vp-p 75 ohms
s-video out (Y)1 Vp-p 75 ohms
component video out (Y)1 Vp-p 75 ohms
Weight and Dimensions IconWeight and Dimensions
dimensions430 X 78.5 X 265 mm
weight4.06 kg

Related product manuals